Mr. Heater MH80CV Betriebsanleitung PDF herunterladen (Seite 5)

Operating Instructions and Owner’s ManualConvection Construction Heater

E-5

CAUTION: NEVER IGNITE AND / OR RUN THIS HEATER UNLESS THE SHELLS

ARE FULLY EXTENDED AND LOCKED INTO POSITION.

STEP 2: LIfT OUTER SHELL STRAIGHT UP. CARE MUST BE TAKEN

TO PROTECT HANDS DURING LIFT.

STEP 3: LIFT OUTER SHELL UNTIL ALL THREE CLIPS

ENGAGE SLOTS IN LOWER SHELL. WHEN THIS HAPPENS,

THE SCREW HOLES WILL LINE UP.

STEP 4: LOCK THE CLIP INTO PLACE WITH 3 SCREWS AS

SHOWN. THE HEATER MUST NOT BE OPERATED UNLESS THE

OUTER SHELL IS PROPERLY EXTENDED AND FULLY LOCKED INTO

PLACE.

CAUTION: NEVER IGNITE AND / OR RUN THIS HEATER UNLESS THE SHELLS

ARE FULLY EXTENDED AND LOCKED INTO POSITION.

STEP 1: HEATER AS RECEIVED OUT OF BOX. BEFORE

LIFTING OUTER SHELL PROTECT HANDS. NEVER

GRASP BARE METAL WITHOUT HAND PROTECTION.

Make sure clip goes into

slot in lower shell.

3 Places

Lock shells together and

clips in place with screws

in each clip. 3 Screws

Total.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Keine Kommentare

Mr. Heater MH80CV Betriebsanleitung Seite 5